| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in the DHCP snooping feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload unexpectedly, resulting in a denial of service (DoS) condition.
This vulnerability is due to a crafted IPv4 DHCP request packet being mishandled when endpoint analytics are enabled. An attacker could exploit this vulnerability by sending a crafted DHCP request through an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition.
Note: The attack vector is listed as network because a DHCP relay anywhere on the network could allow exploits from networks other than the adjacent one. |
| A vulnerability in the access control list (ACL) programming for port channel subinterfaces of Cisco Nexus 3000 and 9000 Series Switches in standalone NX-OS mode could allow an unauthenticated, remote attacker to send traffic that should be blocked through an affected device.
This vulnerability is due to incorrect hardware programming that occurs when configuration changes are made to port channel member ports. An attacker could exploit this vulnerability by attempting to send traffic through an affected device. A successful exploit could allow the attacker to access network resources that should be protected by an ACL that was applied on port channel subinterfaces. |
| A vulnerability in the web-based management interface of Cisco Identity Services Engine (ISE) could allow an unauthenticated, remote attacker to conduct a cross-site request forgery (CSRF) attack and perform arbitrary actions on an affected device.
This vulnerability is due to insufficient CSRF protections for the web-based management interface of an affected device. An attacker could exploit this vulnerability by persuading a user of the interface to follow a crafted link. A successful exploit could allow the attacker to perform arbitrary actions on the affected device with the privileges of the targeted user. |
| A vulnerability in the API of Cisco ISE could allow an authenticated, remote attacker to read and delete arbitrary files on an affected device. To exploit this vulnerability, the attacker would need valid Super Admin credentials.
This vulnerability is due to insufficient validation of user-supplied parameters in API requests. An attacker could exploit this vulnerability by sending a crafted API request to an affected device. A successful exploit could allow the attacker to read or delete arbitrary files on the underlying operating system. |
| A vulnerability in the API of Cisco ISE could allow an authenticated, remote attacker to read and delete arbitrary files on an affected device. To exploit this vulnerability, the attacker would need valid Super Admin credentials.
This vulnerability is due to insufficient validation of user-supplied parameters in API requests. An attacker could exploit this vulnerability by sending a crafted API request to an affected device. A successful exploit could allow the attacker to read or delete arbitrary files on the underlying operating system. |
| A vulnerability in the API of Cisco ISE could allow an authenticated, remote attacker to upload files to arbitrary locations on the underlying operating system of an affected device. To exploit this vulnerability, an attacker would need valid Super Admin credentials.
This vulnerability is due to insufficient validation of user-supplied parameters in API requests. An attacker could exploit this vulnerability by sending a crafted API request to an affected device. A successful exploit could allow the attacker to upload custom files to arbitrary locations on the underlying operating system, execute arbitrary code, and elevate privileges to root. |
| A vulnerability in the API of Cisco ISE could allow an authenticated, remote attacker to read and delete arbitrary files on an affected device. To exploit this vulnerability, the attacker would need valid Super Admin credentials.
This vulnerability is due to insufficient validation of user-supplied parameters in API requests. An attacker could exploit this vulnerability by sending a crafted API request to an affected device. A successful exploit could allow the attacker to read or delete arbitrary files on the underlying operating system. |
| A vulnerability in the web-based management interface of Cisco ISE could allow an authenticated, remote attacker to conduct a stored XSS attack against a user of the interface.
This vulnerability is due to insufficient validation of user-supplied input by the web-based management interface of an affected system. An attacker could exploit this vulnerability by injecting malicious code into specific pages of the interface. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information. To exploit this vulnerability, the attacker must have at least a low-privileged account on an affected device. |
| A vulnerability in the web-based management interface of Cisco TelePresence Management Suite (TMS) Software could allow an authenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the interface. This vulnerability is due to insufficient input validation by the web-based management interface. An attacker could exploit this vulnerability by inserting malicious data in a specific data field in the interface. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information. |
| The Comcast firmware on Cisco DPC3939 (firmware version dpc3939-P20-18-v303r20421733-160420a-CMCST); Cisco DPC3939 (firmware version dpc3939-P20-18-v303r20421746-170221a-CMCST); Cisco DPC3939B (firmware version dpc3939b-v303r204217-150321a-CMCST); Cisco DPC3941T (firmware version DPC3941_2.5s3_PROD_sey); and Arris TG1682G (eMTA&DOCSIS version 10.0.132.SIP.PC20.CT, software version TG1682_2.2p7s2_PROD_sey) devices allows remote attackers to execute arbitrary code via a specific (but unstated) exposed service. NOTE: the scope of this CVE does NOT include the concept of "Unnecessary Services" in general; the scope is only a single service that is unnecessarily exposed, leading to remote code execution. The details of that service might be disclosed at a later date. |
| The Comcast firmware on Cisco DPC3939 (firmware version dpc3939-P20-18-v303r20421733-160420a-CMCST); Cisco DPC3939 (firmware version dpc3939-P20-18-v303r20421746-170221a-CMCST); and Arris TG1682G (eMTA&DOCSIS version 10.0.132.SIP.PC20.CT, software version TG1682_2.2p7s2_PROD_sey) devices makes it easy for remote attackers to determine the hidden SSID and passphrase for a Home Security Wi-Fi network. |
| The Comcast firmware on Cisco DPC3939 (firmware version dpc3939-P20-18-v303r20421733-160420a-CMCST) and DPC3939 (firmware version dpc3939-P20-18-v303r20421746-170221a-CMCST) devices allows remote attackers to discover the CM MAC address by connecting to the device's xfinitywifi hotspot. |
| The Comcast firmware on Cisco DPC3939 (firmware version dpc3939-P20-18-v303r20421733-160420a-CMCST) and DPC3939 (firmware version dpc3939-P20-18-v303r20421746-170221a-CMCST) devices sets the CM MAC address to a value with a two-byte offset from the MTA/VoIP MAC address, which indirectly allows remote attackers to discover hidden Home Security Wi-Fi networks by leveraging the embedding of the MTA/VoIP MAC address into the DNS hostname. |
| The Comcast firmware on Cisco DPC3939 (firmware version dpc3939-P20-18-v303r20421746-170221a-CMCST) devices allows remote attackers to execute arbitrary commands as root by leveraging local network access and connecting to the syseventd server, as demonstrated by copying configuration data into a readable filesystem. |
| The Comcast firmware on Cisco DPC3939 (firmware version dpc3939-P20-18-v303r20421746-170221a-CMCST) devices allows local users (e.g., users who have command access as a consequence of CVE-2017-9479 exploitation) to read arbitrary files via UPnP access to /var/IGD/. |
| The Comcast firmware on Cisco DPC3939 (firmware version dpc3939-P20-18-v303r20421746-170221a-CMCST) devices allows remote attackers to obtain unintended access to the Network Processor (NP) 169.254/16 IP network by adding a routing-table entry that specifies the LAN IP address as the router for that network. |
| The Comcast firmware on Cisco DPC3939 (firmware version dpc3939-P20-18-v303r20421746-170221a-CMCST) devices allows remote attackers to obtain root access to the Network Processor (NP) Linux system by enabling a TELNET daemon (through CVE-2017-9479 exploitation) and then establishing a TELNET session. |
| The Comcast firmware on Cisco DPC3939 (firmware version dpc3939-P20-18-v303r20421746-170221a-CMCST) devices allows Network Processor (NP) Linux users to obtain root access to the Application Processor (AP) Linux system via shell metacharacters in commands. |
| The Comcast firmware on Cisco DPC3939 (firmware version dpc3939-P20-18-v303r20421733-160420a-CMCST) and DPC3939 (firmware version dpc3939-P20-18-v303r20421746-170221a-CMCST) devices allows remote attackers to discover a CM MAC address by sniffing Wi-Fi traffic and performing simple arithmetic calculations. |
| The Comcast firmware on Cisco DPC3939 (firmware version dpc3939-P20-18-v303r20421746-170221a-CMCST) devices allows remote attackers to write arbitrary data to a known /var/tmp/sess_* pathname by leveraging the device's operation in UI dev mode. |
