| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: do not update mtu if msg_max is too small in mtu negotiation
When doing link mtu negotiation, a malicious peer may send Activate msg
with a very small mtu, e.g. 4 in Shuang's testing, without checking for
the minimum mtu, l->mtu will be set to 4 in tipc_link_proto_rcv(), then
n->links[bearer_id].mtu is set to 4294967228, which is a overflow of
'4 - INT_H_SIZE - EMSG_OVERHEAD' in tipc_link_mss().
With tipc_link.mtu = 4, tipc_link_xmit() kept printing the warning:
tipc: Too large msg, purging xmit list 1 5 0 40 4!
tipc: Too large msg, purging xmit list 1 15 0 60 4!
And with tipc_link_entry.mtu 4294967228, a huge skb was allocated in
named_distribute(), and when purging it in tipc_link_xmit(), a crash
was even caused:
general protection fault, probably for non-canonical address 0x2100001011000dd: 0000 [#1] PREEMPT SMP PTI
CPU: 0 PID: 0 Comm: swapper/0 Kdump: loaded Not tainted 6.3.0.neta #19
RIP: 0010:kfree_skb_list_reason+0x7e/0x1f0
Call Trace:
<IRQ>
skb_release_data+0xf9/0x1d0
kfree_skb_reason+0x40/0x100
tipc_link_xmit+0x57a/0x740 [tipc]
tipc_node_xmit+0x16c/0x5c0 [tipc]
tipc_named_node_up+0x27f/0x2c0 [tipc]
tipc_node_write_unlock+0x149/0x170 [tipc]
tipc_rcv+0x608/0x740 [tipc]
tipc_udp_recv+0xdc/0x1f0 [tipc]
udp_queue_rcv_one_skb+0x33e/0x620
udp_unicast_rcv_skb.isra.72+0x75/0x90
__udp4_lib_rcv+0x56d/0xc20
ip_protocol_deliver_rcu+0x100/0x2d0
This patch fixes it by checking the new mtu against tipc_bearer_min_mtu(),
and not updating mtu if it is too small. |
| In the Linux kernel, the following vulnerability has been resolved:
media: v4l2-mem2mem: add lock to protect parameter num_rdy
Getting below error when using KCSAN to check the driver. Adding lock to
protect parameter num_rdy when getting the value with function:
v4l2_m2m_num_src_bufs_ready/v4l2_m2m_num_dst_bufs_ready.
kworker/u16:3: [name:report&]BUG: KCSAN: data-race in v4l2_m2m_buf_queue
kworker/u16:3: [name:report&]
kworker/u16:3: [name:report&]read-write to 0xffffff8105f35b94 of 1 bytes by task 20865 on cpu 7:
kworker/u16:3: v4l2_m2m_buf_queue+0xd8/0x10c |
| In the Linux kernel, the following vulnerability has been resolved:
virtio-mmio: don't break lifecycle of vm_dev
vm_dev has a separate lifecycle because it has a 'struct device'
embedded. Thus, having a release callback for it is correct.
Allocating the vm_dev struct with devres totally breaks this protection,
though. Instead of waiting for the vm_dev release callback, the memory
is freed when the platform_device is removed. Resulting in a
use-after-free when finally the callback is to be called.
To easily see the problem, compile the kernel with
CONFIG_DEBUG_KOBJECT_RELEASE and unbind with sysfs.
The fix is easy, don't use devres in this case.
Found during my research about object lifetime problems. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/xattr: missing fdput() in fremovexattr error path
In the Linux kernel, the fremovexattr() syscall calls fdget() to acquire a
file reference but returns early without calling fdput() when
strncpy_from_user() fails on the name argument. In multi-threaded processes
where fdget() takes the slow path, this permanently leaks one
file reference per call, pinning the struct file and associated kernel
objects in memory. An unprivileged local user can exploit this to cause
kernel memory exhaustion. The issue was inadvertently fixed by commit
a71874379ec8 ("xattr: switch to CLASS(fd)"). |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_set_rbtree: validate open interval overlap
Open intervals do not have an end element, in particular an open
interval at the end of the set is hard to validate because of it is
lacking the end element, and interval validation relies on such end
element to perform the checks.
This patch adds a new flag field to struct nft_set_elem, this is not an
issue because this is a temporary object that is allocated in the stack
from the insert/deactivate path. This flag field is used to specify that
this is the last element in this add/delete command.
The last flag is used, in combination with the start element cookie, to
check if there is a partial overlap, eg.
Already exists: 255.255.255.0-255.255.255.254
Add interval: 255.255.255.0-255.255.255.255
~~~~~~~~~~~~~
start element overlap
Basically, the idea is to check for an existing end element in the set
if there is an overlap with an existing start element.
However, the last open interval can come in any position in the add
command, the corner case can get a bit more complicated:
Already exists: 255.255.255.0-255.255.255.254
Add intervals: 255.255.255.0-255.255.255.255,255.255.255.0-255.255.255.254
~~~~~~~~~~~~~
start element overlap
To catch this overlap, annotate that the new start element is a possible
overlap, then report the overlap if the next element is another start
element that confirms that previous element in an open interval at the
end of the set.
For deletions, do not update the start cookie when deleting an open
interval, otherwise this can trigger spurious EEXIST when adding new
elements.
Unfortunately, there is no NFT_SET_ELEM_INTERVAL_OPEN flag which would
make easier to detect open interval overlaps. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: bpf: defer hook memory release until rcu readers are done
Yiming Qian reports UaF when concurrent process is dumping hooks via
nfnetlink_hooks:
BUG: KASAN: slab-use-after-free in nfnl_hook_dump_one.isra.0+0xe71/0x10f0
Read of size 8 at addr ffff888003edbf88 by task poc/79
Call Trace:
<TASK>
nfnl_hook_dump_one.isra.0+0xe71/0x10f0
netlink_dump+0x554/0x12b0
nfnl_hook_get+0x176/0x230
[..]
Defer release until after concurrent readers have completed. |
| In the Linux kernel, the following vulnerability has been resolved:
clsact: Fix use-after-free in init/destroy rollback asymmetry
Fix a use-after-free in the clsact qdisc upon init/destroy rollback asymmetry.
The latter is achieved by first fully initializing a clsact instance, and
then in a second step having a replacement failure for the new clsact qdisc
instance. clsact_init() initializes ingress first and then takes care of the
egress part. This can fail midway, for example, via tcf_block_get_ext(). Upon
failure, the kernel will trigger the clsact_destroy() callback.
Commit 1cb6f0bae504 ("bpf: Fix too early release of tcx_entry") details the
way how the transition is happening. If tcf_block_get_ext on the q->ingress_block
ends up failing, we took the tcx_miniq_inc reference count on the ingress
side, but not yet on the egress side. clsact_destroy() tests whether the
{ingress,egress}_entry was non-NULL. However, even in midway failure on the
replacement, both are in fact non-NULL with a valid egress_entry from the
previous clsact instance.
What we really need to test for is whether the qdisc instance-specific ingress
or egress side previously got initialized. This adds a small helper for checking
the miniq initialization called mini_qdisc_pair_inited, and utilizes that upon
clsact_destroy() in order to fix the use-after-free scenario. Convert the
ingress_destroy() side as well so both are consistent to each other. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/mseal: update VMA end correctly on merge
Previously we stored the end of the current VMA in curr_end, and then upon
iterating to the next VMA updated curr_start to curr_end to advance to the
next VMA.
However, this doesn't take into account the fact that a VMA might be
updated due to a merge by vma_modify_flags(), which can result in curr_end
being stale and thus, upon setting curr_start to curr_end, ending up with
an incorrect curr_start on the next iteration.
Resolve the issue by setting curr_end to vma->vm_end unconditionally to
ensure this value remains updated should this occur.
While we're here, eliminate this entire class of bug by simply setting
const curr_[start/end] to be clamped to the input range and VMAs, which
also happens to simplify the logic. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix constant blinding for PROBE_MEM32 stores
BPF_ST | BPF_PROBE_MEM32 immediate stores are not handled by
bpf_jit_blind_insn(), allowing user-controlled 32-bit immediates to
survive unblinded into JIT-compiled native code when bpf_jit_harden >= 1.
The root cause is that convert_ctx_accesses() rewrites BPF_ST|BPF_MEM
to BPF_ST|BPF_PROBE_MEM32 for arena pointer stores during verification,
before bpf_jit_blind_constants() runs during JIT compilation. The
blinding switch only matches BPF_ST|BPF_MEM (mode 0x60), not
BPF_ST|BPF_PROBE_MEM32 (mode 0xa0). The instruction falls through
unblinded.
Add BPF_ST|BPF_PROBE_MEM32 cases to bpf_jit_blind_insn() alongside the
existing BPF_ST|BPF_MEM cases. The blinding transformation is identical:
load the blinded immediate into BPF_REG_AX via mov+xor, then convert
the immediate store to a register store (BPF_STX).
The rewritten STX instruction must preserve the BPF_PROBE_MEM32 mode so
the architecture JIT emits the correct arena addressing (R12-based on
x86-64). Cannot use the BPF_STX_MEM() macro here because it hardcodes
BPF_MEM mode; construct the instruction directly instead. |
| In the Linux kernel, the following vulnerability has been resolved:
svcrdma: bound check rq_pages index in inline path
svc_rdma_copy_inline_range indexed rqstp->rq_pages[rc_curpage] without
verifying rc_curpage stays within the allocated page array. Add guards
before the first use and after advancing to a new page. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI/IOV: Fix race between SR-IOV enable/disable and hotplug
Commit 05703271c3cd ("PCI/IOV: Add PCI rescan-remove locking when
enabling/disabling SR-IOV") tried to fix a race between the VF removal
inside sriov_del_vfs() and concurrent hot unplug by taking the PCI
rescan/remove lock in sriov_del_vfs(). Similarly the PCI rescan/remove lock
was also taken in sriov_add_vfs() to protect addition of VFs.
This approach however causes deadlock on trying to remove PFs with SR-IOV
enabled because PFs disable SR-IOV during removal and this removal happens
under the PCI rescan/remove lock. So the original fix had to be reverted.
Instead of taking the PCI rescan/remove lock in sriov_add_vfs() and
sriov_del_vfs(), fix the race that occurs with SR-IOV enable and disable vs
hotplug higher up in the callchain by taking the lock in
sriov_numvfs_store() before calling into the driver's sriov_configure()
callback. |
| In the Linux kernel, the following vulnerability has been resolved:
futex: Fix UaF between futex_key_to_node_opt() and vma_replace_policy()
During futex_key_to_node_opt() execution, vma->vm_policy is read under
speculative mmap lock and RCU. Concurrently, mbind() may call
vma_replace_policy() which frees the old mempolicy immediately via
kmem_cache_free().
This creates a race where __futex_key_to_node() dereferences a freed
mempolicy pointer, causing a use-after-free read of mpol->mode.
[ 151.412631] BUG: KASAN: slab-use-after-free in __futex_key_to_node (kernel/futex/core.c:349)
[ 151.414046] Read of size 2 at addr ffff888001c49634 by task e/87
[ 151.415969] Call Trace:
[ 151.416732] __asan_load2 (mm/kasan/generic.c:271)
[ 151.416777] __futex_key_to_node (kernel/futex/core.c:349)
[ 151.416822] get_futex_key (kernel/futex/core.c:374 kernel/futex/core.c:386 kernel/futex/core.c:593)
Fix by adding rcu to __mpol_put(). |
| In the Linux kernel, the following vulnerability has been resolved:
tls: Purge async_hold in tls_decrypt_async_wait()
The async_hold queue pins encrypted input skbs while
the AEAD engine references their scatterlist data. Once
tls_decrypt_async_wait() returns, every AEAD operation
has completed and the engine no longer references those
skbs, so they can be freed unconditionally.
A subsequent patch adds batch async decryption to
tls_sw_read_sock(), introducing a new call site that
must drain pending AEAD operations and release held
skbs. Move __skb_queue_purge(&ctx->async_hold) into
tls_decrypt_async_wait() so the purge is centralized
and every caller -- recvmsg's drain path, the -EBUSY
fallback in tls_do_decryption(), and the new read_sock
batch path -- releases held skbs on synchronization
without each site managing the purge independently.
This fixes a leak when tls_strp_msg_hold() fails part-way through,
after having added some cloned skbs to the async_hold
queue. tls_decrypt_sg() will then call tls_decrypt_async_wait() to
process all pending decrypts, and drop back to synchronous mode, but
tls_sw_recvmsg() only flushes the async_hold queue when one record has
been processed in "fully-async" mode, which may not be the case here.
[pabeni@redhat.com: added leak comment] |
| In the Linux kernel, the following vulnerability has been resolved:
macvlan: fix error recovery in macvlan_common_newlink()
valis provided a nice repro to crash the kernel:
ip link add p1 type veth peer p2
ip link set address 00:00:00:00:00:20 dev p1
ip link set up dev p1
ip link set up dev p2
ip link add mv0 link p2 type macvlan mode source
ip link add invalid% link p2 type macvlan mode source macaddr add 00:00:00:00:00:20
ping -c1 -I p1 1.2.3.4
He also gave a very detailed analysis:
<quote valis>
The issue is triggered when a new macvlan link is created with
MACVLAN_MODE_SOURCE mode and MACVLAN_MACADDR_ADD (or
MACVLAN_MACADDR_SET) parameter, lower device already has a macvlan
port and register_netdevice() called from macvlan_common_newlink()
fails (e.g. because of the invalid link name).
In this case macvlan_hash_add_source is called from
macvlan_change_sources() / macvlan_common_newlink():
This adds a reference to vlan to the port's vlan_source_hash using
macvlan_source_entry.
vlan is a pointer to the priv data of the link that is being created.
When register_netdevice() fails, the error is returned from
macvlan_newlink() to rtnl_newlink_create():
if (ops->newlink)
err = ops->newlink(dev, ¶ms, extack);
else
err = register_netdevice(dev);
if (err < 0) {
free_netdev(dev);
goto out;
}
and free_netdev() is called, causing a kvfree() on the struct
net_device that is still referenced in the source entry attached to
the lower device's macvlan port.
Now all packets sent on the macvlan port with a matching source mac
address will trigger a use-after-free in macvlan_forward_source().
</quote valis>
With all that, my fix is to make sure we call macvlan_flush_sources()
regardless of @create value whenever "goto destroy_macvlan_port;"
path is taken.
Many thanks to valis for following up on this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_u32: use skb_header_pointer_careful()
skb_header_pointer() does not fully validate negative @offset values.
Use skb_header_pointer_careful() instead.
GangMin Kim provided a report and a repro fooling u32_classify():
BUG: KASAN: slab-out-of-bounds in u32_classify+0x1180/0x11b0
net/sched/cls_u32.c:221 |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: Don't clobber irqfd routing type when deassigning irqfd
When deassigning a KVM_IRQFD, don't clobber the irqfd's copy of the IRQ's
routing entry as doing so breaks kvm_arch_irq_bypass_del_producer() on x86
and arm64, which explicitly look for KVM_IRQ_ROUTING_MSI. Instead, to
handle a concurrent routing update, verify that the irqfd is still active
before consuming the routing information. As evidenced by the x86 and
arm64 bugs, and another bug in kvm_arch_update_irqfd_routing() (see below),
clobbering the entry type without notifying arch code is surprising and
error prone.
As a bonus, checking that the irqfd is active provides a convenient
location for documenting _why_ KVM must not consume the routing entry for
an irqfd that is in the process of being deassigned: once the irqfd is
deleted from the list (which happens *before* the eventfd is detached), it
will no longer receive updates via kvm_irq_routing_update(), and so KVM
could deliver an event using stale routing information (relative to
KVM_SET_GSI_ROUTING returning to userspace).
As an even better bonus, explicitly checking for the irqfd being active
fixes a similar bug to the one the clobbering is trying to prevent: if an
irqfd is deactivated, and then its routing is changed,
kvm_irq_routing_update() won't invoke kvm_arch_update_irqfd_routing()
(because the irqfd isn't in the list). And so if the irqfd is in bypass
mode, IRQs will continue to be posted using the old routing information.
As for kvm_arch_irq_bypass_del_producer(), clobbering the routing type
results in KVM incorrectly keeping the IRQ in bypass mode, which is
especially problematic on AMD as KVM tracks IRQs that are being posted to
a vCPU in a list whose lifetime is tied to the irqfd.
Without the help of KASAN to detect use-after-free, the most common
sympton on AMD is a NULL pointer deref in amd_iommu_update_ga() due to
the memory for irqfd structure being re-allocated and zeroed, resulting
in irqfd->irq_bypass_data being NULL when read by
avic_update_iommu_vcpu_affinity():
BUG: kernel NULL pointer dereference, address: 0000000000000018
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 40cf2b9067 P4D 40cf2b9067 PUD 408362a067 PMD 0
Oops: Oops: 0000 [#1] SMP
CPU: 6 UID: 0 PID: 40383 Comm: vfio_irq_test
Tainted: G U W O 6.19.0-smp--5dddc257e6b2-irqfd #31 NONE
Tainted: [U]=USER, [W]=WARN, [O]=OOT_MODULE
Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 34.78.2-0 09/05/2025
RIP: 0010:amd_iommu_update_ga+0x19/0xe0
Call Trace:
<TASK>
avic_update_iommu_vcpu_affinity+0x3d/0x90 [kvm_amd]
__avic_vcpu_load+0xf4/0x130 [kvm_amd]
kvm_arch_vcpu_load+0x89/0x210 [kvm]
vcpu_load+0x30/0x40 [kvm]
kvm_arch_vcpu_ioctl_run+0x45/0x620 [kvm]
kvm_vcpu_ioctl+0x571/0x6a0 [kvm]
__se_sys_ioctl+0x6d/0xb0
do_syscall_64+0x6f/0x9d0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x46893b
</TASK>
---[ end trace 0000000000000000 ]---
If AVIC is inhibited when the irfd is deassigned, the bug will manifest as
list corruption, e.g. on the next irqfd assignment.
list_add corruption. next->prev should be prev (ffff8d474d5cd588),
but was 0000000000000000. (next=ffff8d8658f86530).
------------[ cut here ]------------
kernel BUG at lib/list_debug.c:31!
Oops: invalid opcode: 0000 [#1] SMP
CPU: 128 UID: 0 PID: 80818 Comm: vfio_irq_test
Tainted: G U W O 6.19.0-smp--f19dc4d680ba-irqfd #28 NONE
Tainted: [U]=USER, [W]=WARN, [O]=OOT_MODULE
Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 34.78.2-0 09/05/2025
RIP: 0010:__list_add_valid_or_report+0x97/0xc0
Call Trace:
<TASK>
avic_pi_update_irte+0x28e/0x2b0 [kvm_amd]
kvm_pi_update_irte+0xbf/0x190 [kvm]
kvm_arch_irq_bypass_add_producer+0x72/0x90 [kvm]
irq_bypass_register_consumer+0xcd/0x170 [irqbypa
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
cgroup/dmem: avoid pool UAF
An UAF issue was observed:
BUG: KASAN: slab-use-after-free in page_counter_uncharge+0x65/0x150
Write of size 8 at addr ffff888106715440 by task insmod/527
CPU: 4 UID: 0 PID: 527 Comm: insmod 6.19.0-rc7-next-20260129+ #11
Tainted: [O]=OOT_MODULE
Call Trace:
<TASK>
dump_stack_lvl+0x82/0xd0
kasan_report+0xca/0x100
kasan_check_range+0x39/0x1c0
page_counter_uncharge+0x65/0x150
dmem_cgroup_uncharge+0x1f/0x260
Allocated by task 527:
Freed by task 0:
The buggy address belongs to the object at ffff888106715400
which belongs to the cache kmalloc-512 of size 512
The buggy address is located 64 bytes inside of
freed 512-byte region [ffff888106715400, ffff888106715600)
The buggy address belongs to the physical page:
Memory state around the buggy address:
ffff888106715300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff888106715380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff888106715400: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff888106715480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff888106715500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
The issue occurs because a pool can still be held by a caller after its
associated memory region is unregistered. The current implementation frees
the pool even if users still hold references to it (e.g., before uncharge
operations complete).
This patch adds a reference counter to each pool, ensuring that a pool is
only freed when its reference count drops to zero. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: target: iscsi: Fix use-after-free in iscsit_dec_session_usage_count()
In iscsit_dec_session_usage_count(), the function calls complete() while
holding the sess->session_usage_lock. Similar to the connection usage count
logic, the waiter signaled by complete() (e.g., in the session release
path) may wake up and free the iscsit_session structure immediately.
This creates a race condition where the current thread may attempt to
execute spin_unlock_bh() on a session structure that has already been
deallocated, resulting in a KASAN slab-use-after-free.
To resolve this, release the session_usage_lock before calling complete()
to ensure all dereferences of the sess pointer are finished before the
waiter is allowed to proceed with deallocation. |
| In the Linux kernel, the following vulnerability has been resolved:
linkwatch: use __dev_put() in callers to prevent UAF
After linkwatch_do_dev() calls __dev_put() to release the linkwatch
reference, the device refcount may drop to 1. At this point,
netdev_run_todo() can proceed (since linkwatch_sync_dev() sees an
empty list and returns without blocking), wait for the refcount to
become 1 via netdev_wait_allrefs_any(), and then free the device
via kobject_put().
This creates a use-after-free when __linkwatch_run_queue() tries to
call netdev_unlock_ops() on the already-freed device.
Note that adding netdev_lock_ops()/netdev_unlock_ops() pair in
netdev_run_todo() before kobject_put() would not work, because
netdev_lock_ops() is conditional - it only locks when
netdev_need_ops_lock() returns true. If the device doesn't require
ops_lock, linkwatch won't hold any lock, and netdev_run_todo()
acquiring the lock won't provide synchronization.
Fix this by moving __dev_put() from linkwatch_do_dev() to its
callers. The device reference logically pairs with de-listing the
device, so it's reasonable for the caller that did the de-listing
to release it. This allows placing __dev_put() after all device
accesses are complete, preventing UAF.
The bug can be reproduced by adding mdelay(2000) after
linkwatch_do_dev() in __linkwatch_run_queue(), then running:
ip tuntap add mode tun name tun_test
ip link set tun_test up
ip link set tun_test carrier off
ip link set tun_test carrier on
sleep 0.5
ip tuntap del mode tun name tun_test
KASAN report:
==================================================================
BUG: KASAN: use-after-free in netdev_need_ops_lock include/net/netdev_lock.h:33 [inline]
BUG: KASAN: use-after-free in netdev_unlock_ops include/net/netdev_lock.h:47 [inline]
BUG: KASAN: use-after-free in __linkwatch_run_queue+0x865/0x8a0 net/core/link_watch.c:245
Read of size 8 at addr ffff88804de5c008 by task kworker/u32:10/8123
CPU: 0 UID: 0 PID: 8123 Comm: kworker/u32:10 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Workqueue: events_unbound linkwatch_event
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x100/0x190 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0x156/0x4c9 mm/kasan/report.c:482
kasan_report+0xdf/0x1a0 mm/kasan/report.c:595
netdev_need_ops_lock include/net/netdev_lock.h:33 [inline]
netdev_unlock_ops include/net/netdev_lock.h:47 [inline]
__linkwatch_run_queue+0x865/0x8a0 net/core/link_watch.c:245
linkwatch_event+0x8f/0xc0 net/core/link_watch.c:304
process_one_work+0x9c2/0x1840 kernel/workqueue.c:3257
process_scheduled_works kernel/workqueue.c:3340 [inline]
worker_thread+0x5da/0xe40 kernel/workqueue.c:3421
kthread+0x3b3/0x730 kernel/kthread.c:463
ret_from_fork+0x754/0xaf0 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:246
</TASK>
================================================================== |
