| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| SoftEtherVPN is a an open-source cross-platform multi-protocol VPN Program. In 5.2.5188 and earlier, a pre-authentication denial-of-service vulnerability exists in SoftEther VPN Developer Edition 5.2.5188 (and likely earlier versions of Developer Edition). An unauthenticated remote attacker can crash the vpnserver process by sending a single malformed EAP-TLS packet over raw L2TP (UDP/1701), terminating all active VPN sessions. |
| NVIDIA Triton Inference Server contains a vulnerability where insufficient input validation and a large number of outputs could cause a server crash. A successful exploit of this vulnerability might lead to denial of service. |
| tar.Reader can allocate an unbounded amount of memory when reading a maliciously-crafted archive containing a large number of sparse regions encoded in the "old GNU sparse map" format. |
| OpenTelemetry-Go is the Go implementation of OpenTelemetry. Prior to 1.43.0, the otlp HTTP exporters (traces/metrics/logs) read the full HTTP response body into an in-memory bytes.Buffer without a size cap. This is exploitable for memory exhaustion when the configured collector endpoint is attacker-controlled (or a network attacker can mitm the exporter connection). This vulnerability is fixed in 1.43.0. |
| An issue was discovered in MariaDB Server before 11.4.10, 11.5.x through 11.8.x before 11.8.6, and 12.x before 12.2.2. If the caching_sha2_password authentication plugin is installed, and some user accounts are configured to use it, a large packet can crash the server because sha256_crypt_r uses alloca. |
| An attacker might be able to trick DNSdist into allocating too much memory while processing DNS over QUIC or DNS over HTTP/3 payloads, resulting in a denial of service. In setups with a large quantity of memory available this usually results in an exception and the QUIC connection is properly closed, but in some cases the system might enter an out-of-memory state instead and terminate the process. |
| NVIDIA Triton Inference Server contains a vulnerability in the HTTP endpoint where an attacker may cause a denial of service by providing a large compressed payload. A successful exploit of this vulnerability may lead to denial of service. |
| Mattermost versions 11.3.x <= 11.3.0, 11.2.x <= 11.2.2, 10.11.x <= 10.11.10 Mattermost fails to limit the size of responses from integration action endpoints, which allows an authenticated attacker to cause server memory exhaustion and denial of service via a malicious integration server that returns an arbitrarily large response when a user clicks an interactive message button.. Mattermost Advisory ID: MMSA-2026-00571 |
| Mattermost versions 11.3.x <= 11.3.0, 11.2.x <= 11.2.2, 10.11.x <= 10.11.10 fail to bound memory allocation when processing PSD image files which allows an authenticated attacker to cause server memory exhaustion and denial of service via uploading a specially crafted PSD file. Mattermost Advisory ID: MMSA-2026-00572 |
| In the Linux kernel, the following vulnerability has been resolved:
nvme: fix memory allocation in nvme_pr_read_keys()
nvme_pr_read_keys() takes num_keys from userspace and uses it to
calculate the allocation size for rse via struct_size(). The upper
limit is PR_KEYS_MAX (64K).
A malicious or buggy userspace can pass a large num_keys value that
results in a 4MB allocation attempt at most, causing a warning in
the page allocator when the order exceeds MAX_PAGE_ORDER.
To fix this, use kvzalloc() instead of kzalloc().
This bug has the same reasoning and fix with the patch below:
https://lore.kernel.org/linux-block/20251212013510.3576091-1-kartikey406@gmail.com/
Warning log:
WARNING: mm/page_alloc.c:5216 at __alloc_frozen_pages_noprof+0x5aa/0x2300 mm/page_alloc.c:5216, CPU#1: syz-executor117/272
Modules linked in:
CPU: 1 UID: 0 PID: 272 Comm: syz-executor117 Not tainted 6.19.0 #1 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
RIP: 0010:__alloc_frozen_pages_noprof+0x5aa/0x2300 mm/page_alloc.c:5216
Code: ff 83 bd a8 fe ff ff 0a 0f 86 69 fb ff ff 0f b6 1d f9 f9 c4 04 80 fb 01 0f 87 3b 76 30 ff 83 e3 01 75 09 c6 05 e4 f9 c4 04 01 <0f> 0b 48 c7 85 70 fe ff ff 00 00 00 00 e9 8f fd ff ff 31 c0 e9 0d
RSP: 0018:ffffc90000fcf450 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 1ffff920001f9ea0
RDX: 0000000000000000 RSI: 000000000000000b RDI: 0000000000040dc0
RBP: ffffc90000fcf648 R08: ffff88800b6c3380 R09: 0000000000000001
R10: ffffc90000fcf840 R11: ffff88807ffad280 R12: 0000000000000000
R13: 0000000000040dc0 R14: 0000000000000001 R15: ffffc90000fcf620
FS: 0000555565db33c0(0000) GS:ffff8880be26c000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000002000000c CR3: 0000000003b72000 CR4: 00000000000006f0
Call Trace:
<TASK>
alloc_pages_mpol+0x236/0x4d0 mm/mempolicy.c:2486
alloc_frozen_pages_noprof+0x149/0x180 mm/mempolicy.c:2557
___kmalloc_large_node+0x10c/0x140 mm/slub.c:5598
__kmalloc_large_node_noprof+0x25/0xc0 mm/slub.c:5629
__do_kmalloc_node mm/slub.c:5645 [inline]
__kmalloc_noprof+0x483/0x6f0 mm/slub.c:5669
kmalloc_noprof include/linux/slab.h:961 [inline]
kzalloc_noprof include/linux/slab.h:1094 [inline]
nvme_pr_read_keys+0x8f/0x4c0 drivers/nvme/host/pr.c:245
blkdev_pr_read_keys block/ioctl.c:456 [inline]
blkdev_common_ioctl+0x1b71/0x29b0 block/ioctl.c:730
blkdev_ioctl+0x299/0x700 block/ioctl.c:786
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
__se_sys_ioctl fs/ioctl.c:583 [inline]
__x64_sys_ioctl+0x1bf/0x220 fs/ioctl.c:583
x64_sys_call+0x1280/0x21b0 mnt/fuzznvme_1/fuzznvme/linux-build/v6.19/./arch/x86/include/generated/asm/syscalls_64.h:17
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x71/0x330 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7fb893d3108d
Code: 28 c3 e8 46 1e 00 00 66 0f 1f 44 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffff61f2f38 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007ffff61f3138 RCX: 00007fb893d3108d
RDX: 0000000020000040 RSI: 00000000c01070ce RDI: 0000000000000003
RBP: 0000000000000001 R08: 0000000000000000 R09: 00007ffff61f3138
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000001
R13: 00007ffff61f3128 R14: 00007fb893dae530 R15: 0000000000000001
</TASK> |
| A Memory Allocation with Excessive Size Value vulnerability in Trane Tracer SC, Tracer SC+, and Tracer Concierge could allow an unauthenticated attacker to cause a denial-of-service condition |
| RTPS dissector memory leak in Wireshark 4.0.0 to 4.0.8 and 3.6.0 to 3.6.16 allows denial of service via packet injection or crafted capture file |
| Active Storage allows users to attach cloud and local files in Rails applications. Prior to versions 8.1.2.1, 8.0.4.1, and 7.2.3.1, when serving files through Active Storage's proxy delivery mode, the proxy controller loads the entire requested byte range into memory before sending it. A request with a large or unbounded Range header (e.g. `bytes=0-`) could cause the server to allocate memory proportional to the file size, possibly resulting in a DoS vulnerability through memory exhaustion. Versions 8.1.2.1, 8.0.4.1, and 7.2.3.1 contain a patch. |
| Sliver is a command and control framework that uses a custom Wireguard netstack. Versions 1.7.3 and below contain a Remote OOM (Out-of-Memory) vulnerability in the Sliver C2 server's mTLS and WireGuard C2 transport layer. The socketReadEnvelope and socketWGReadEnvelope functions trust an attacker-controlled 4-byte length prefix to allocate memory, with ServerMaxMessageSize allowing single allocations of up to ~2 GiB. A compromised implant or an attacker with valid credentials can exploit this by sending fabricated length prefixes over concurrent yamux streams (up to 128 per connection), forcing the server to attempt allocating ~256 GiB of memory and triggering an OS OOM kill. This crashes the Sliver server, disrupts all active implant sessions, and may degrade or kill other processes sharing the same host. The same pattern also affects all implant-side readers, which have no upper-bound check at all. The issue was not fixed at the the time of publication. |
| dr_libs dr_flac.h version 0.13.3 and earlier contain an uncontrolled memory allocation vulnerability in drflac__read_and_decode_metadata() that allows attackers to trigger excessive memory allocation by supplying crafted PICTURE metadata blocks. Attackers can exploit attacker-controlled mimeLength and descriptionLength fields to cause denial of service through memory exhaustion when processing FLAC streams with metadata callbacks. |
| Mattermost versions 11.3.x <= 11.3.0, 11.2.x <= 11.2.2, 10.11.x <= 10.11.10 fail to bound memory allocation when processing DOC files which allows an authenticated attacker to cause server memory exhaustion and denial of service via uploading a specially crafted DOC file.. Mattermost Advisory ID: MMSA-2026-00581 |
| FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to 3.24.0, Integer Underflow in update_read_cache_bitmap_order Function of FreeRDP's Core Library This vulnerability is fixed in 3.24.0. |
| Memory Allocation with Excessive Size Value (CWE-789) in the Prometheus remote_write HTTP handler in Metricbeat can lead Denial of Service via Excessive Allocation (CAPEC-130). |
| Panda3D versions up to and including 1.10.16 deploy-stub contains a denial of service vulnerability due to unbounded stack allocation. The deploy-stub executable allocates argv_copy and argv_copy2 using alloca() based directly on the attacker-controlled argc value without validation. Supplying a large number of command-line arguments can exhaust stack space and propagate uninitialized stack memory into Python interpreter initialization, resulting in a reliable crash and undefined behavior. |
| psd-tools is a Python package for working with Adobe Photoshop PSD files. Prior to version 1.12.2, when a PSD file contains malformed RLE-compressed image data (e.g. a literal run that extends past the expected row size), decode_rle() raises ValueError which propagated all the way to the user, crashing psd.composite() and psd-tools export. decompress() already had a fallback that replaces failed channels with black pixels when result is None, but it never triggered because the ValueError from decode_rle() was not caught. The fix in version 1.12.2 wraps the decode_rle() call in a try/except so the existing fallback handles the error gracefully. |
